KSL Series 5.X/2.4GHz 1/2xE1/T1

PDH / Ethernet Convergent System 1xE1/T1 and 2xE1/T1

KymaLink series delivers up to 54Mbps air rate for Ethernet (Up to 6 Mbps Throughput) and 1 or 2 ports E1 (T1) traffic (Net throughput 23Mbps). The system operates in 2.4 GHz ISM Band or 5.8 UNII Band. KymaStar/KymaLink employs Time Division Duplex (TDD) transmission. This technology simplifies the installation and configuration procedure. There is no need to plan and to allocate separate channels for the uplink and downlink data streams. Operation over 2.4GHz and 5.x GHz UNII bands is not affected by harsh weather conditions, such as fog, heavy rain etc. The KymaLink series offers more than just an attractive price-point per link and powerful performance characteristics. Easy of installation and alignment along with smart management capabilities make setup and configuration.                            [Data Sheet]

KSP49-1049-XX / KSP50-1050-XX

The KymaLite KSP49/KSP5X-1050-XX is designed for Carrier and Internet Service Providers to address the last-mile wireless infrastructure solution with high performance and competitive cost. It is compliant to IEEE802.11a standard; it comes with software controllable RF power output and distant setting for optimal distant (up to 8km) Vs throughput performance. The compact outdoor casing complies with IP68 standard and is water and dust resistant. Integrated with a 12dBi directional antenna, and data rate of up to 108Mbps on Turbo mode, the KSP49/KSP5X-1050-XX series has been tested to deliver a high TCP throughput of up to 20Mbps. With an option to have the WDS (wireless distribution system) turning on or off, it is

interoperable with most of the standard 802.11 a/b/g APs in the market. It can also support multiple users with the WDS turned off. Data encryption such as WEP, WPA-PSK and WPA/2 is possible providing the necessary security and interoperability with other equipment . Enhanced access control can be done with the use of MAC address filtering, both on the AP and the client side. Additionally, it is firmware upgradeable through web-server and Telnet.             [Data Sheet]

KSL Series

KSL Series 5.X/2.4GHz 4xE1/T1

PDH / Ethernet Convergent System 4xE1/T1

This KymaLink delivers up to 54Mbps air rate for Ethernet (Up to 6 Mbps Throughput) and 4 ports E1 (T1) traffic (Net throughput 23Mbps). The system operates in 2.4 GHz ISM Band or 5.8 UNII Band. KymaStar/KymaLink employs Time Division Duplex (TDD) transmission. This technology simplifies the installation and configuration procedure. There is no need to plan and to allocate separate channels for the uplink and downlink data streams. Operation over 2.4GHz and 5.x GHz UNII bands is not affected by harsh weather conditions, such as fog, heavy rain etc. The KymaLink series offers more than just an attractive price-point per link and powerful performance characteristics. Easy of installation and alignment along with smart management capabilities make setup and configuration.                            [Data Sheet]

KSLV35 KymaFrac 2.4_3.3_4.9_5.X

802.11a Wideband Access Outdoor Radio              KSF Series 5.X / 4.9 / 3.3 / 2.4 GHz E1-2/V.35

KymaStar/Kyma Fractional is a compact, cost effective and very easy for deployment of E1 (Full / Fractional) last mile device, which converge E1, V.35 and IP protocol. It is ideal for wireless links because it delivers LAN and high quality voice to remote locations over high reliability OFDM radio.

The KymaStar/Kyma Fractional with a single E1 can provide 30 or 24 voice channels, two types of connectors (120Ω/75Ω) that can be manually selected by dip switch. The E1 type (Full/Fractional/BNC/RJ45) is selectable via software. One Ethernet port for IP packets transfer can be independently set for each Ethernet port: up to 6.4 Mbps.              [Data Sheet]

KL Series

WIRELESS WITHOUT BOUNDARIES