IP1000c - 311 Mbps IP Digital Microwave Radio
The IP1000c Ethernet radio system is a full-featured compact split mount digital radio offering full duplex committed data rates over 300 Mbps in IP based networks. The radio supports software configurable capacity selection between 33 and 304 Mbps in either 28, 30, 40 or 56 MHz channel bandwidths.
Utilizing proprietary advanced ASIC modem technology using advanced Forward Error Correction (FEC) this microwave radio provides superior performance and reliability at a low cost in the licensed 6 to 38 GHz bands. Access the data sheet for more details.
Choice of the ANSI version with T1s and the ETSI version with E1s. ETSI [Data Sheet] ANSI [Data Sheet]
IP170ew - 170 Mbps Series Microwave Radio System
PDH 4-16E1/T1s E3/DS3 and/or Ethernet up to 170 Mbps
The IP170 is a low-cost point to point FDD/PDH digital microwave radio system for E1 or T1 payloads. The IP170 Series products support capacities up to 16 E1 / T1 lines or E3 /DS-3 and Wayside Ethernet Full Duplex capacity up to 8.4 Mbps.
The IP170 operates in frequency ranges from 6 to 38 GHz. It is available in Non-Protected (1+0) and protected (1+1) mode in HSB, MHSB, frequency diversity (FD), and space diversity (SD) configuration. It is also configurable for Repeater Operation. It can be mounted directly on properly equipped antenna, or it can be mounted separately and connected using standard UBR flange series waveguide. ETSI [Data Sheet] ANSI [Data Sheet]
IP170o - 170 Mbps Ethernet Only
IP100c / IP+PDH Software-Defined Radio
Programmable bandwidths and capacities up to 100 Mbps with E1s or T1s. Operating Frequencies: 6 to 38 GHz
The IP100c is a low-cost point to point microwave radio system for IP / PDH payload. IP100c supports software-configurable capacity (8 - 100 Mbps) and channel bandwidths (7 MHz to 28 MHz), as well as field-replaceable plug-in modules for all common payload interfaces.
The IP100c employs proprietary ASIC modem technology to achieve superior performance at a low cost. The system features powerful Trellis Coded Modulation (TCM) schemes with significant improvements to system gain and interference-immunity, directly translating to longer links, smaller antennas and lower network-deployment cost. ETSI [Data Sheet] ANSI [Data Sheet]
Challenger Series Microwave System - Challenger 60/24
Up to 24 E1s and/or 60+ Mbps of Ethernet
The Challenger is a low-cost point to point FDD/PDH digital microwave radio system for E1 and Ethernet payload. The Challenger Series products support capacities up to 24 E1 lines, Ethernet Full Duplex capacity up to 62 Mbps, or a combination.
The Challenger operates in a multiple frequency ranges, from 3.5 to 38 GHz. It is available in Non-Protected (1+0) and protected (1+1) mode in HSB, MHSB, frequency diversity (FD), and space diversity (SD) configurations. It is also configurable for Repeater (East-West) Operation. ETSI [Data Sheet]
KSL Series 5.X/2.4GHz 1/2xE1/T1
PDH / Ethernet Convergent System 1xE1/T1 and 2xE1/T1
KymaLink series delivers up to 54Mbps air rate for Ethernet (Up to 6 Mbps Throughput) and 1 or 2 ports E1 (T1) traffic (Net throughput 23Mbps). The system operates in 2.4 GHz ISM Band or 5.8 UNII Band. KymaStar/KymaLink employs Time Division Duplex (TDD) transmission. This technology simplifies the installation and configuration procedure. There is no need to plan and to allocate separate channels for the uplink and downlink data streams. Operation over 2.4GHz and 5.x GHz UNII bands is not affected by harsh weather conditions, such as fog, heavy rain etc. The KymaLink series offers more than just an attractive price-point per link and powerful performance characteristics. Easy of installation and alignment along with smart management capabilities make setup and configuration. [Data Sheet]
WIRELESS WITHOUT BOUNDARIES
KSP49-1049-XX / KSP50-1050-XX
The KymaLite KSP49/KSP5X-1050-XX is designed for Carrier and Internet Service Providers to address the last-mile wireless infrastructure solution with high performance and competitive cost. It is compliant to IEEE802.11a standard; it comes with software controllable RF power output and distant setting for optimal distant (up to 8km) Vs throughput performance. The compact outdoor casing complies with IP68 standard and is water and dust resistant. Integrated with a 12dBi directional antenna, and data rate of up to 108Mbps on Turbo mode, the KSP49/KSP5X-1050-XX series has been tested to deliver a high TCP throughput of up to 20Mbps. With an option to have the WDS (wireless distribution system) turning on or off, it is
interoperable with most of the standard 802.11 a/b/g APs in the market. It can also support multiple users with the WDS turned off. Data encryption such as WEP, WPA-PSK and WPA/2 is possible providing the necessary security and interoperability with other equipment . Enhanced access control can be done with the use of MAC address filtering, both on the AP and the client side. Additionally, it is firmware upgradeable through web-server and Telnet. [Data Sheet]
KSL Series
KSL Series 5.X/2.4GHz 4xE1/T1
PDH / Ethernet Convergent System 4xE1/T1
This KymaLink delivers up to 54Mbps air rate for Ethernet (Up to 6 Mbps Throughput) and 4 ports E1 (T1) traffic (Net throughput 23Mbps). The system operates in 2.4 GHz ISM Band or 5.8 UNII Band. KymaStar/KymaLink employs Time Division Duplex (TDD) transmission. This technology simplifies the installation and configuration procedure. There is no need to plan and to allocate separate channels for the uplink and downlink data streams. Operation over 2.4GHz and 5.x GHz UNII bands is not affected by harsh weather conditions, such as fog, heavy rain etc. The KymaLink series offers more than just an attractive price-point per link and powerful performance characteristics. Easy of installation and alignment along with smart management capabilities make setup and configuration. [Data Sheet]
KSLV35 KymaFrac 2.4_3.3_4.9_5.X
802.11a Wideband Access Outdoor Radio KSF Series 5.X / 4.9 / 3.3 / 2.4 GHz E1-2/V.35
KymaStar/Kyma Fractional is a compact, cost effective and very easy for deployment of E1 (Full / Fractional) last mile device, which converge E1, V.35 and IP protocol. It is ideal for wireless links because it delivers LAN and high quality voice to remote locations over high reliability OFDM radio.
The KymaStar/Kyma Fractional with a single E1 can provide 30 or 24 voice channels, two types of connectors (120Ω/75Ω) that can be manually selected by dip switch. The E1 type (Full/Fractional/BNC/RJ45) is selectable via software. One Ethernet port for IP packets transfer can be independently set for each Ethernet port: up to 6.4 Mbps. [Data Sheet]
KS Series
KS04-2004HBS
The KymaStar KS04 series is a cost-effective point to point / point to multipoint solution for 400 MHz band, deployment of both backhaul and “last mile” solutions.
High Output Power with OFDM technology gives the ability for Near to Non Line of Sight deployment for distance of up to 30 Km, and the unique proprietary technique, Regatta mode improves throughput by 25 to 30%, to >26 Mbps in 20 MHz Band.
The KymaStar KS04 series utilizes Time Division Duplex (TDD) technology allowing operation on a single channel. The KymaStar products are primarily designed to provide standard Ethernet interface in a wireless link between distant sites. [Data Sheet]
KS09-2513-EXT / KS09-3713-IDT
The KymaStar KS09 series is a cost-effective point to point / point to multipoint solution for 900 MHz band, deployment of both backhaul and “last mile” solutions. High Output Power with OFDM technology gives the ability for Near to Non Line of Sight deployment for distance of up to 30 Km, and the unique proprietary technique, Regatta mode improves throughput by 25 to 30%, to >26 Mbps in 20 MHz Band.
The KymaStar KS09 series utilizes Time Division Duplex (TDD) technology allowing operation on a single channel. The KymaStar products are primarily designed to provide standard Ethernet interface in a wireless link between distant sites. [Data Sheet]
KS24-2302-X / KS24-2702-X
802.11g/b Multi-Function Outdoor Radio
Using advanced OFDM and power amp technology. This KymaStar series has high output power which provides long transmission distance. It operates at 2.4GHz band with 14+ non-overlapping channels. This 802.11g/b outdoor radio is an ideal solution for enterprise / campus connectivity, Hotspot and next-generation broadband wireless Access. It’s easier and cost effective to deploy the wireless access environment with the Wireless Distribution System (WDS) technology.
The KymaStar has powerful security management because it supports WEP 64/128/152 bits, AES-128, or WPA-PSK and WPA2 encryption, 802.1x Authentication (EAP), MAC access control Authorization, disabling the broadcast SSID, and client isolation. [Data Sheet]
KS24-XX16-EXT / KS24-XX16-I23
802.11g/b Wideband Access Outdoor Radio
The 2.4GHz ISM Band KymaStar KS24-XX12 Series from WNI Global, Inc. is a cost-effective point to point / point to multipoint solution for unlicensed wireless deployment both for backhaul and “last mile” distribution system.
KymaStar KS24-XX12 Series product is working at 2.4GHz ISM band, which let the system operator deploy the applications with the lower cost. The fractional bandwidth control feature allow more non -overlapping channel in practical deployment that provides better flexibility in designing of the network.
High output power OFDM technology gives the a bility for near -line of sight deployment, and the unique regatta mode can speed up the throughput up to 35%. KymaStar KS24-XX12 Series utilizes Time Division Duplex technology allowing operation on a single channel. The Ethernet products are primarily designed to provide standard Ethernet interface in a wireless link between distant sites. [Data Sheet]
KS49-2118-EXT / KS49-1918-I18
802.11 Public Safety Wireless Access Radio
The 4.9GHz Public Safety Band KymaStar KS49 Series from WNI Global, Inc. is a cost-effective point to point / point to multipoint solution for Public Safety and National Security wireless deployment both for backhaul and “last mile” distribution system.
The KS 49 Series product is working at 4.94 -4.99GHz band, which let the public safety and national security operator deploy the applications with the lower cost. The fractional bandwidth control feature allo w more non -overlapping channel in practical deployment that provides better flexibility in deploying the network.
High output power OFDM technology gives the ability for near -line of sight deployment, and the unique regatta mode can speed up the throughput up to 35% faster. [Data Sheet]
KS5X-2315-EXT / KS5X-2311-I23
The 5GHz Band KymaStar KS5X-2315 Series from WNI Global, Inc. is a cost-effective point-to-point / point-to-multipoint solution for unlicensed wireless deployment both for backhaul and “last mile” distribution system.
This KymaStar KS5X-2315 Series product works in the 5.1~5.8GHz band, which lets the system operator deploy the applications with the lower cost. The fractional bandwidth control feature allow more non-overlapping channel in practical deployment that provides better flexibility in deploying the network. High output power OFDM technology gives the ability for near-line of sight
deployment for distance up to 20 Km, and the unique Regatta mode can speed up throughput up to 30%. [Data Sheet]
KSETH49-1049 / KSETH5X KSETH5X-1050–XX
High Capacity / Long Distance with Low EIRP 4.9/5GHz Outdoor Radio.
Providing high-power with a panel antenna-integrated design; the KSETHER is a high capacity point-to-point backhaul for 4.9 GHz Licensed band and License Exempt 5.X GHz wireless deployment for long distance applications. Offering 5/10/20/40 MHz adjustable channel bandwidth provides the flexibility of a deployment channel plan or high capacity backhaul -- for a true combined throughput of up to 40Mbps. The exceptional 40 Mbps throughput is obtained with 5 or more separate data streams of up to 8 Mbps each. Many more smaller data streams from multiple users are combined to support Ethernet connections up to the link total of 40 Mbps. The KSETHER’s powerful link security management with WEP, WPA2 (AES-128bits) encryption, MAC address filter and use the proprietary protocol ensure data is not shared with other wireless products. These functions make the network much more secure and reliable. [Data Sheet]
KL Series
NEW! KFD Series
All-Outdoor (ODU-only) and Split (IDU+ODU) Products
KymaNet IP Pro Microwave Radio System - Over 300/600+ Mbps Ethernet
This full duplex (FD) point to point all-outdoor microwave full duplex radio system is a flexible, low-cost, feature-rich solution for microwave radios in the global telecommunications market. Power is supplied using -48VDC into an In/Out-door PoE device.
This Ethernet ONLY radio system is a full-featured compact digital radio offering full duplex committed data rates over 300 Mbps (>600 Mbps aggregate) in IP based networks. The radio supports software configurable capacity selection from 11 to over 300 Mbps. This carrier-class professional product provides the highest throughput, easiet installation and the very lowest cost.
KymaFDD IP Small/Compact 5.X GHz Full Duplex - High Capacity OFDM Outdoor Radio
The Kyma FDD is designed for Carriers and Internet Service Providers to address high capacity, low latency, and special packet handling for high priority small packets.
The small and compact outdoor casing complies with IP68 standard which is water and dust resistant. With data rate to deliver a high TCP throughput of up to 35 Mbps.
(70 Mbps aggregate).
Four levels of QoS packet handling to provide high reliability for VOIP, video and network operational packets [Data Sheet]
Consult Factory
